Product · click2SLIM
Open the point cloud you could never open.
Every click2BIM model can now come home with its point cloud, slimmed by click2SLIM — our proprietary, intelligent downsampling — into a LAZ file that opens on a standard office laptop. Your geometry stays. The dead weight goes.
See what it keeps
Drag across the facade. On the left, every point the scanner recorded. On the right, what click2SLIM keeps: edges, corners and openings at full density, the flat surfaces in between thinned out.
Raw scan · every pointclick2SLIM · structure kept
Kept at full densityThinned Schematic illustration, not real scan data.
The name says what it does
- SScalable
- LLiDAR
- IIntelligence
- MModule
click2SLIM slims your point cloud down to what actually matters and keeps the geometry that makes the data valuable. Your storage bill, and your laptop, finally get to breathe.
What it does to your point cloud
-
Structure-aware, not random
click2SLIM doesn’t thin your cloud blindly. Our proprietary, intelligent downsampling recognises the edges, corners and surfaces that carry your geometry, keeps them, and thins the empty, repetitive areas in between.
-
Same model. Lighter file.
We tested it where it counts. In our validation, a slimmed cloud and its full-resolution original produce the same click2BIM model. Lighter to handle, identical to build from.
-
Built for the big scans
Send up to 100 GB. A 100 GB E57 becomes a LAZ of around 10 GB, and clouds over 5 GB are slimmed automatically. No pre-processing and no settings.
-
Proprietary, engineered in-house
click2SLIM runs on proprietary algorithms developed by our own engineers: intelligent downsampling designed for scan-to-BIM, not a generic setting borrowed from a general-purpose tool.
Who it is for
For architects
Open, section and measure the scan on the laptop you already own, and share it with consultants and clients who don’t have a workstation.
For GIS specialists
A LAZ file — an open, widely supported format — at a consistent 5 cm point spacing, ready for your existing workflows.
An 80 GB site scan that standard laptops couldn’t open opened for the first time after click2SLIM.Field validation · real client data
Formats and limits
- InputE57, LAS or LAZ, up to 100 GB.
- OutputLAZ, on its own or alongside your IFC model.
- Under 5 GBConverted to LAZ, with no points removed.
- Over 5 GBSlimmed automatically to a 5 cm point spacing.
Point clouds with a spacing coarser than 5 cm are rejected before processing, with a clear error message.
Three ways to take it home
The BIM model
€0.75per m²
IFC 4.3, with floor slabs, ceilings, walls, doors and windows.
The slimmed point cloud
€25flat
A click2SLIM LAZ file that opens on a standard office laptop.
Best value
Both files
€0.75per m² + €10
The model, with the point cloud for €10 instead of €25, whatever its size.
You choose after you have seen your model, its floor area and the price. For customers billed in Hungary, listed prices are net of 27% VAT; the VAT-inclusive total is shown before payment.
Start with one building
Register, drop a scan, and look at what comes back. You see the model and the price before you decide.